Page 1 of 1

Internal/external fuel tank?

Posted: Tue 09 Aug 11, 10:14
by Vimsa
My Dragonfly 800 MkII has an gas cap but according to the previous owner no internal fuel tank is connected, hence I have an external tank by the rudder on the stern.
Does anyone know the reason for the missing tank, and if it's possible acceass that space to add a new one?

Location?

Posted: Tue 09 Aug 11, 21:29
by Christian
Where is the gas cap?

A fixed gas tank is not standard in a DF800

If you want to know where it goes, it is just to follow the tube and try to figure out if there is a space for a tank in the end - but there are very few free spaces in a DF800.

Posted: Wed 10 Aug 11, 22:48
by Vimsa
It's on the port cockpit seat about 1 dm from the stern. I guess there is a small space between the seat and the hull where I figured that the tank could be located.
If it's not a standard piece of equipment, I'll forget the whole thing.

Posted: Thu 11 Aug 11, 2:58
by tpaliwoda
When I had my 25, we would place the fuel tank on the swim platform, strapped down. Just remember that gasoline fumes in a confined space (under the deck or seat) is never a good idea!

Posted: Thu 11 Aug 11, 17:48
by Vimsa
Yeah, that's where I keep it at the moment.
When I'm not in the boat I put it in the locker beneath the cockpit floor.
That doesn't seem to be optimal though since I can smell gasoline inside the boat with that placement.

Smell of gas

Posted: Fri 12 Aug 11, 17:24
by Christian
There is no solid wall between locker and cabin. If the tank leeks gas you will smell it in cabin.

The problem is sun and day/night temperature - I think. The volume in the tank changes with temperature and sometimes small amount of gas leeks out - that was the problem I had with my previous tank.

Maybe it is a good idea to connect a gas cap on the outside. Like someone did on your boat. Why not on the transom - or on the side of the swim platform. (I don't swim from that place) Then the gas leakage would go out in the air.

I got two holes in the transom - one for power to the autohelm and one for the fuel hose to the motor. Have to think before I make another one.